Diamant Frässcheibe für extrem harten Beton
Groove width:
15 mm
€86.59
Gross
€103.04
Available between 18.06. and 19.06.
Product number:
8021
| Product type: | Diamond milling disc T-segment |
|---|---|
| Model: | V-Profil |
| Field of application: | Dry cut |
| Area of application: | extrem harten Beton |
| Compatible with: | for all standard models with this hole diameter |
| Speed recommendation: | 8.700 1/min |
| Diameter: | 130 mm |
| Number of segments: | 12 T-protection segments |
| Segment height: | 12 mm |
| Segment width: | 15 mm |
| Centre bore: | 22.23 mm |
Product number:
8021
Description
Diamond milling disc for extremely hard concrete with V-profile Ø 130 mm
Tilling extremely hard concrete requires a tool that is unrivalled in terms of precision, efficiency and durability. This is exactly where our diamond milling disc comes in. With a diameter of 130 mm and special laser-welded T-protection segments with a V-profile, it stands for quality and durability.
Your advantages at a glance
Tilling extremely hard concrete requires a tool that is unrivalled in terms of precision, efficiency and durability. This is exactly where our diamond milling disc comes in. With a diameter of 130 mm and special laser-welded T-protection segments with a V-profile, it stands for quality and durability.
Your advantages at a glance
- Specialised for extremely hard concrete: Our milling disc was developed for extremely hard concrete. This makes it the first choice for anyone working with extremely hard building materials
- Optimum performance: Thanks to the higher diamond concentration in each segment, you benefit from impressive cutting performance and an exceptional service life. This means fewer change intervals and a higher working speed for you
- Installation of underfloor heating: Our diamond milling disc is ideal for converting and installing underfloor heating systems.
- V-profile: These provide additional protection and extend the service life of the disc
- Laser-welded T-protection segments: For maximum stability and service life
- Tightly toothed block segments: They enable precise and clean cuts, even in difficult applications
- Super soft bond: Ideal for extremely hard concrete and demanding applications
- Quality certification: Our products are manufactured and tested in accordance with EN13236, which speaks for the highest quality standards.
Properties
| Product type: | Diamond milling disc T-segment |
|---|---|
| Model: | V-Profil |
| Field of application: | Dry cut |
| Area of application: | extrem harten Beton |
| Compatible with: | for all standard models with this hole diameter |
| Speed recommendation: | 8.700 1/min |
| Diameter: | 130 mm |
| Number of segments: | 12 T-protection segments |
| Segment height: | 12 mm |
| Segment width: | 15 mm |
| Centre bore: | 22.23 mm |