Diamant Frässcheibe RUND Ø 130 mm 17 mm
Available between 25.08. and 26.08.
Available, delivery time: 1-3 days
| Product type: | Diamond milling disc T-segment |
|---|---|
| Field of application: | Dry cut |
| Area of application: | Concrete, cement screed, anhydrite screed |
| Compatible with: | for all standard models with this hole diameter |
| Speed recommendation: | 8.700 1/min |
| Diameter: | 130 mm |
| Number of segments: | 12 T-protection segments |
| Segment height: | 12 mm |
| Centre bore: | 22.23 mm |
Description
Diamond milling disc ROUND Ø 130 mm
Tilling extremely hard materials requires a tool that is unrivalled in terms of precision, efficiency and durability. This is exactly where our round diamond milling disc comes in. With a diameter of 130 mm and special T-protection segments, it stands for quality and durability.
Your advantages at a glance
- Specialised for hard floors: Our milling disc was developed for abrasive floors such as mastic asphalt, concrete, cement screed and anhydrite screed. This makes it the first choice for anyone working with extremely hard building materials.
- Optimum performance: Thanks to the higher diamond concentration in each segment, you benefit from impressive cutting performance and an exceptional service life. This means fewer change intervals and a higher working speed for you.
- Installation of underfloor heating: Our diamond milling disc is ideal for converting and installing underfloor heating systems. Whether you want to work on existing screed or build on top of wooden floorboards - this tool will make the conversion efficient and reliable.
- T-protection segments: These provide additional protection and extend the service life of the disc.
- Soldered segments: For maximum stability and service life.
- Tightly toothed block segments: They enable precise and clean cuts, even in difficult applications.
- Super soft bond: Ideal for the hardest building materials and demanding applications.
- Quality certification: Our products are manufactured and tested in accordance with EN13236, which speaks for the highest quality standards.
Properties
| Product type: | Diamond milling disc T-segment |
|---|---|
| Field of application: | Dry cut |
| Area of application: | Concrete, cement screed, anhydrite screed |
| Compatible with: | for all standard models with this hole diameter |
| Speed recommendation: | 8.700 1/min |
| Diameter: | 130 mm |
| Number of segments: | 12 T-protection segments |
| Segment height: | 12 mm |
| Centre bore: | 22.23 mm |
Customers also bought
Available, delivery time: 1-3 days
€141.15
Available, delivery time: 1-3 days
€76.99
Available, delivery time: 1-3 days
€76.99
Available, delivery time: 1-3 days
€141.15
Available, delivery time: 1-3 days
€167.99