Diamond cutting disc for asphalt Ø 500 mm
Available between 29.05. and 01.06.
| Product type: | Diamond cutting disc |
|---|---|
| Field of application: | Wet cutting |
| Area of application: | Asphalt |
| Compatible with: | SuperCut 500 X |
| Speed recommendation: | max. 3060 1/min |
| Diameter: | 500 mm |
| Number of segments: | 30 |
| Segment height: | 10 mm |
| Segment length: | 40 mm |
| Segment width: | 3.8 mm |
Description
Diamond cutting disc for asphalt Ø 500 mm - for SuperCut 500 X floor saws and commercially available models
The diamond cutting disc for asphalt with a diameter of 500 mm is a special tool for efficient cutting of asphalt and similar materials. This type of cutting disc differs in some respects from those for concrete, as asphalt has different properties and places different demands on cutting. The diamond cutting disc can be equipped with our SuperCut 500 X floor cutter and many commercially available models.
Material-specific design
Asphalt is a softer material than concrete and tends to stick to the cut surface. For this reason, the diamond cutting discs for asphalt are manufactured with specific diamond bonds to prevent sticking and ensure a clean cut edge. The special segment design helps to minimise heat generation during cutting.
Diamond setting
Although diamonds are still the main element for cutting ability, the configuration and bonding of the diamonds in asphalt discs differs from those in concrete discs. They are designed to enable a higher cutting speed in softer materials.
500 mm diameter
The 500 mm diameter enables deeper cuts, which is particularly advantageous for larger asphalt surfaces, such as those found in road construction or maintenance work.
Application
These cut-off wheels are often used in road construction where precise cuts are required, such as road widening, repairs or the laying of cables and pipes.
Choosing the right cut-off wheel for asphalt is crucial to achieve efficient and precise results while maximising the life of the equipment. It is also important that the cutting disc is compatible with the machine in question to achieve optimum results and ensure safety at work.
Properties
| Product type: | Diamond cutting disc |
|---|---|
| Field of application: | Wet cutting |
| Area of application: | Asphalt |
| Compatible with: | SuperCut 500 X |
| Speed recommendation: | max. 3060 1/min |
| Diameter: | 500 mm |
| Number of segments: | 30 |
| Segment height: | 10 mm |
| Segment length: | 40 mm |
| Segment width: | 3.8 mm |
Reviews 0
Login
Customers also bought
€377.95