M12 threaded rod with BFS-PRO wing nut for core drilling stands
Available between 25.08. and 26.08.
Available, delivery time: 1-3 days
| Product type: | Mounting for core drill rig |
|---|---|
| Area of application: | Concrete, reinforced concrete |
| Material: | galvanised steel |
| Thread: | M12 |
| Length: | 175 mm |
Description
M12 threaded rod with BFS-PRO wing nut for core drilling stands
The M12 x 16.8 mm threaded rod, 175 mm in length, is an essential fixing accessory for core drilling stands. It is used to secure the core drilling stand safely and securely. This specific version of the threaded rod is fitted with a large nut and a washer, which enhance the stability and safety of the mounting.
The mounting kit for core drilling stands
To securely fix a core drilling stand using the mounting kit, care must be taken to ensure that an M12 fixing plug (not included) is securely and firmly anchored in the substrate. The threaded rod is mounted vertically, at a right angle to the core drilling stand, so that the washer and nut rest flat against the base of the core drilling stand. Use a ring spanner or open-ended spanner with a SW27 size to tighten the nut.
The load-bearing capacity of the connection depends on the size and length of the threaded rod, as well as the condition of the concrete or masonry surface. It is therefore essential to plan the specific requirements of each application carefully and to select the appropriate fasteners to ensure a stable and secure fixing.
Important
If there is any deformation or visible damage, replace the fixing set immediately.
Properties
| Product type: | Mounting for core drill rig |
|---|---|
| Area of application: | Concrete, reinforced concrete |
| Material: | galvanised steel |
| Thread: | M12 |
| Length: | 175 mm |
Customers also bought
Available, delivery time: 1-3 days
€74.69
Available, delivery time: 1-3 days
€65.75
€1,119.95
Available, delivery time: 1-3 days
€54.13
Available, delivery time: 1-3 days
€275.50