SAS-PRO dust extraction system with 1 1/4 UNC connection

SAS-PRO dust extractor with 1 1/4 UNC connection

The SAS-PRO dust extractor is specially designed for use with diamond core bits and is therefore suitable for use with core drills that have a 1 1/4 inch UNC external thread. It is also compatible with core bits with a 1 1/4 inch UNC internal thread. To ensure that the dust extraction system works properly, it is important that the thread of the core bit and the thread of the core drill match.

When using dry drilling, it is always of the utmost importance to use an effective dust extraction system. The use of such extraction is imperative to ensure the health and safety of workers and the integrity of the working environment.

The SAS-PRO dust extraction unit is characterised by its robustness and is therefore suitable for use in various work areas, both indoors and outdoors. Using this extraction system significantly reduces the amount of fine dust generated during work. This not only protects you as the operator, but also protects everyone else from the negative effects of fine dust that may be present in the ambient air. Using the SAS-PRO dust extraction system therefore contributes to a healthier working environment and can help to prevent health problems caused by exposure to fine dust

Using the SAS-PRO dust extraction system also has a positive impact on the service life of your tool. The cooling of the vacuum created during the extraction process protects the tool and can lead to a longer service life. This not only leads to savings in tool replacement costs, but also to time savings, as new tools need to be purchased less frequently.

Features

• 1 1/4 inch UNC female thread for connection to the core drill
• 1 1/4 inch UNC external thread for connection to the diamond core bits
• Hose connection for hoover with Ø 32 mm - inside and Ø 38 mm - outside.