AirMaxPro 5.0 construction dryer - 55 litre dehumidification capacity

AirMaxPro 5.0 construction dryer

Are you looking for a reliable and efficient construction dryer for indoor use? Then the AirMaxPro 5.0 is just right for you!

The AirMaxPro 5.0 has been designed for a wide range of environmental conditions.

Its high dehumidification performance of up to 55 litres per day makes it suitable for rooms with an area of up to 60 m². The possible application temperature is between 5°C and 35°C and the permissible relative humidity is between 30% and 80%.

The control element built into the AirMaxPro 5.0 is characterised by its simplicity and user-friendliness.

Thanks to the environmentally friendly refrigerant propane (R 290) and an impressive air circulation rate of 350 m³/h, the AirMaxPro 5.0 works very efficiently and reliably. Its freezing pressure of 0.8 MPa and vapour pressure of 2.8 MPa optimise performance.

Additional safety is provided by functions such as automatic fault diagnosis and automatic switch-off.

The AirMaxPro 5.0 is equipped with a T3 15 A fuse and has a sound power level of 50 to 55 dB(A), making it well suited for indoor use.

Despite its high dehumidification performance, the AirMaxPro 5.0 has compact dimensions and weighs just 30 kg.

With the AirMaxPro 5.0, the water produced during dehumidification is collected in a condensate container, which must be emptied several times a day depending on the application. However, the AirMaxPro 5.0 also offers the option of connecting a hose to the condensate container and allowing the water to flow freely into a suitable drainage pipe or a sufficiently large collection container.

Refrigerant:

The use of the refrigerant propane (R 290) in our construction dryers offers various ecological, economic and technical advantages:

Environmental friendliness: propane is characterised by a low global warming potential, making it a more environmentally friendly alternative to many traditional refrigerants. It contributes less to global warming and has minimal ozone depletion potential, meaning it is less damaging to the ozone layer than traditional refrigerants.

Efficiency: Propane is known for its high cooling capacity and energy efficiency. Construction dryers that run on propane can therefore work very effectively, which not only improves dehumidification performance but also reduces operating costs.

Technical advantages: Propane is a versatile refrigerant that can be used in a variety of applications. It has a high evaporation temperature and high pressure, making it suitable for applications that require high operating temperatures.

Building dryers in the trades: how they solve moisture problems quickly and effectively

Building dryers are an indispensable tool in the trades, especially when refurbishing and renovating buildings. When it comes to removing moisture from a room or building, a building dryer is the best tool for the job.

A building dryer is a device that draws air through a filter and then passes it through a cooling system, which in turn removes the moisture from the air. The dry air is then returned to the room, reducing the humidity in the room. Most construction dryers are portable and can be easily transported from one room to another, making them ideal for use in the trades.

There are many reasons why a tradesman should use a construction dryer. One of the most common reasons is to dry rooms after a flood or water damage. In such cases, moisture can quickly penetrate walls, floors and ceilings and cause serious damage. A building dryer can help to remove this moisture quickly before it causes permanent damage.

Another reason why tradesmen use construction dryers is to prepare surfaces for painting or plastering work. A damp surface can result in paint or plaster not adhering properly. By using a construction dryer, the moisture can be removed from the surface so that the paint or plaster adheres better and a smoother result is achieved.

Building dryers are essential for any tradesperson who has to deal with moisture problems in buildings. Whether renovating old buildings or repairing water damage, a building dryer can solve the problem quickly and effectively and ensure a smooth construction or renovation process.

5 important tips for safe and effective use

When using construction dryers, there are a few important things to consider to ensure optimum performance and safety:

Room temperature: construction dryers should be used at room temperatures between 5 and 32 degrees Celsius to ensure optimum performance. At lower temperatures, the efficiency of the appliance may be impaired.

Ventilation: It is important to ventilate the room in which the construction dryer is used well in order to optimally distribute the dry air and thus accelerate the removal of moisture from the air.

Maintenance: Construction dryers require regular maintenance to ensure optimum performance. Maintenance essentially involves regularly cleaning the air filters and checking for dirt or damage.

Safety: Construction dryers must be used safely to avoid fires or other hazards. This means that the appliance must not be operated in the vicinity of flammable materials, the air to be dehumidified must not contain solvents or other hazardous substances and the manufacturer's operating instructions must be followed exactly.

Duration: Construction dryers should not be used permanently, as very dry air can lead to health problems. It is therefore important to only use the appliance for the time required and then switch it off or remove it.

If tradespeople take these factors into account, they can ensure that they use their construction dryers effectively and safely to solve moisture problems in buildings.