Diamond cutting discs for asphalt Ø 500 mm
Diamond cutting discs for asphalt with a diameter of 500 mm are specialised tools designed for efficient cutting of asphalt and similar materials. This type of cutting disc differs in some respects from those used for concrete, as asphalt has different properties and presents different cutting challenges.
Material-specific design: Asphalt is a softer material than concrete and tends to stick to the cutting surface. For this reason, diamond cutting discs for asphalt are often manufactured with special segment designs and diamond compounds to prevent sticking and ensure a clean cutting edge.
Segmentdesign: The segments on an asphalt cutting disc are usually designed to be wider and flatter. This design helps to minimise heat build-up during cutting, which is particularly important as asphalt tends to soften at higher temperatures.
Diamond setting: Although diamonds are still the main element for cutting ability, the configuration and bonding of the diamonds on asphalt discs is different to concrete discs. They are often designed to provide a faster cutting speed on softer materials.
500 mm diameter: A cutting disc with a diameter of 500 mm enables deeper cuts, which is particularly useful for larger asphalt surfaces, such as those found in road construction or maintenance work.
Application: These cutting discs are often used in the road construction industry, where precise cuts are required for things like road widening, repairs or laying cables and pipes.
Choosing the right cut-off wheel for asphalt is crucial to achieve efficient and precise results while maximising the life of the equipment. It is also important that the cutting disc is compatible with the machine in question to achieve optimum results and ensure safety at work.
Diamond cutting discs for concrete Ø 500 mm
156,42 €
186,14 €
Diamond milling disc round, 130 mm, with T-protection segments 17 mm for extremely hard soils
69,46 €
82,66 €
Universal diamond sanding disc Ø 250 mm for medium-hard floors with 20 premium segments
161,99 €
192,77 €
Diamond milling disc round, 130 mm, with T-protection segments 15 mm for extremely hard soils
65,98 €
78,52 €
Diamond milling disc square, 130 mm, with T-protection segments 15 mm for abrasive building materials
80,56 €
95,87 €
179,49 €
213,59 €
Diamond cutting discs for concrete Ø 500 mm
156,42 €
186,14 €
Diamond milling disc, round, 130 mm, with T-protection segments 16 mm for extremely hard floors
67,52 €
80,35 €
Available on 2024-06-17
Diamond grinding disc Ø 250 mm for asphalt and abrasive materials with 20 premium segments
187,99 €
223,71 €
Diamond milling disc square, 130 mm, with T-protection segments 16 mm for abrasive building materials
83,25 €
99,07 €
189,99 €
226,09 €
Diamond milling disc square, 130 mm, with T-protection segments 17 mm for abrasive building materials
84,39 €
100,42 €
Arix high-performance diamond cutting disc Ø 350 mm for reinforced concrete, Ø drill hole 20 mm
71,96 €
85,63 €
Diamond cutting discs for concrete Ø 500 mm
156,42 €
186,14 €