2 carbon brushes for the core drill DKB-165/3SH
Replacement carbon brushes suitable for the specified model. By using high quality materials there is less sparking and a long service life.
Carbon brushes (sliding motor) are needed in motors and generators for the electrical contact to the collector or slip rings of the rotating part of the machine (rotor or armature). Carbon brushes are indispensable because they are an essential part of the machine.
When in use, it is not only the wear of the carbon brush that plays a role. Carbon brushes must protect the mating material of the commutator or slip ring, as replacing them is significantly more expensive than replacing the carbon brush as a wearing part. Replacing worn carbon brushes in a motor does not reset its service life to zero, because the commutator or slip rings and bearings also wear out.
2 carbon brushes for the core drill DKB-132/2H
12,49 €
14,86 €
22,03 €
26,22 €
Kernlochbohrer Shaft seal Ø 26 mm for the DKB-165/3SH core drill
15,49 €
18,43 €
2 carbon brushes for the magnetic drilling machine MKB-35HD
12,49 €
14,86 €
499,99 €
594,99 €
Available on 2024-05-20
2 carbon brushes for the core drill DKB-200/3SH
13,49 €
16,05 €
HSS twist drill Ø 8 mm for steel and metal (5 pcs.)
7,20 €
8,57 €
20,35 €
24,22 €
HSS twist drill Ø 6 mm for steel and metal (10 pcs.)
7,34 €
8,73 €
2 carbon brushes for the core drill DKB-502/S-PRO
15,99 €
19,03 €
14,99 €
17,84 €
27,40 €
32,61 €
HSS twist drill Ø 10 mm for steel and metal (5 pcs.)
12,50 €
14,88 €
49,07 €
58,39 €
HSS twist drill Ø 5 mm for steel and metal (10 pcs.)
5,16 €
6,14 €
2 carbon brushes for the core drill DKB-352/S-PRO
15,99 €
19,03 €
HSS core drill set 7 pieces
109,19 €
129,94 €
TURBO diamond core bit Ø 82 mm length 160 mm M16
34,35 €
40,88 €
Kernlochbohrer Shaft seal Ø 26 mm for the DKB-165/3SH core drill
15,49 €
18,43 €
26,98 €
32,11 €
PREMIUM diamond core bit Ø 62 mm length 450 mm
48,98 €
58,29 €
Extension for diamond core bits 300 mm 1 1/4 UNC
54,59 €
64,96 €
Case set 5 pcs. diamond core bits
142,09 €
169,09 €
82,49 €
98,16 €
Diamond core bit Ø 62 mm with 3 TURBO segments
48,19 €
57,35 €
19,15 €
22,79 €
Core drill rig KBS-200M for core drilling equipment
419,99 €
499,79 €
41,99 €
49,97 €
Diamond core bit Ø 162 mm with 7 TURBO segments
132,74 €
157,96 €
Diamond core bit Ø 82 mm with 4 TURBO segments
58,42 €
69,52 €
Available on 2024-05-17
Diamond core bit Ø 132 mm with 6 TURBO segments
106,58 €
126,83 €
Diamond core bit Ø 57 mm with 3 TURBO segments
45,10 €
53,67 €
Diamond core bit Ø 112 mm with 5 TURBO segments
71,76 €
85,39 €
Available on 2024-05-17