Item no.: 6207
DKB352/PRO + KBS352/PRO
Core drilling machine with stand, as a set, for concrete, reinforced concrete and masonry; wet drilling
Drilling diameter: 402 mm in the upright
Operation: wet
Fixing: dowels
Material: concrete, reinforced concrete, stone, masonry
Available between 17.11. and 18.11.
| Product type: | Diamond core drill with core drill stand |
|---|---|
| Suitable for: | Reinforced concrete | Masonry | Brick | Calcium silicate brick | Facing brick | Concrete |
| Power consumption: | 3,300 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | I |
| Number of gears: | 3 |
| Tool holder: | 1 1/4" UNC |
| Connection for core drilling rig: | Mounting adapter 60 mm |
| Mounting: | Kordel-Fix Kit xl |
| Water supply connection: | Gardena |
| Weight: | 13.5 kg |
| Weight (stand): | 18.5 kg |
| Vibration level: | 6 m/s² |
| Wet/dry drilling: | Wet |
| Additional functions: | LED/Load Indicator | Overload protection | Soft start |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drilling system |
| Mounting type: | Kordel-Fix Kit xl |
| Weight (drilling rig): | 13.5 kg |
High customer satisfaction
Over 5,000 professionals trust us. We are Trusted Shops certified.
Top-class support
Expert and personalised advice from genuine experts.
Professional quality
Robust equipment for demanding tasks.
German brand
Sales, service and spare parts direct from Germany.
97% satisfaction: Over 5,000 tradespeople and construction companies trust us.
Top-class support: Expert and personalised advice from genuine specialists.
Professional quality: Robust tools for demanding jobs and continuous use.
German brand: Service and spare parts direct from Germany.
DKB352/PRO core drilling system with KBS352/PRO: wet drilling up to 402 mm, a complete solution from a single source
This set is ideal for getting started with stand-guided drilling in a single purchase: a 3,300-watt Diamond core drill with a three-speed gearbox, plus a core drill stand with dowel fixing and a chassis – all perfectly matched and fitted without the need for adaptors. Wet drilling in concrete, reinforced concrete, stone and masonry.
- Up to Ø 402 mm and 650 mm drilling depth: the stand and drill cover the same range, so there’s no need to compromise when using large core bits.
- Three speeds, 350 / 700 / 1100 rpm: the right speed for diameters ranging from 100 to 400.
- LCD display, soft start, slip clutch, PRCD: keep an eye on the load, smooth start-up, protection against jamming.
- Ready for installation: mounting adapter, quick-release ring, open-ended spanner and spare carbon brushes included; tool supplied in a case.
Technical Specifications
| Product type: | Diamond core drill with core drill stand |
|---|---|
| Suitable for: | Reinforced concrete , Masonry , Brick , Calcium silicate brick , Facing brick , Concrete |
| Power consumption: | 3,300 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | I |
| Number of gears: | 3 |
| Tool holder: | 1 1/4" UNC |
| Connection for core drilling rig: | Mounting adapter 60 mm |
| Mounting: | Kordel-Fix Kit xl |
| Water supply connection: | Gardena |
| Weight: | 13.5 kg |
| Weight (stand): | 18.5 kg |
| Vibration level: | 6 m/s² |
| Wet/dry drilling: | Wet |
| Additional functions: | LED/Load Indicator , Overload protection , Soft start |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drilling system |
| Mounting type: | Kordel-Fix Kit xl |
| Weight (drilling rig): | 13.5 kg |
DKB352/PRO core drilling system with KBS352/PRO core drill stand for wet drilling up to 402 mm
This set combines our 3 kW class stand-mounted wet drilling rig with the matching anchor stand: 3, 300 watts, three-speed gearbox in oil bath, up to Ø 402 mm and 650 mm drilling depth, for concrete, reinforced concrete, stone and masonry.
For thick walls and foundations, the same machine is available as the DKB352/PRO core drilling system with the KBS352/XL-PRO, featuring a 2 m guide stand for drilling depths up to 1600 mm. Unit and stand sold separately: DKB352/PRO and KBS352/PRO.
Drilling diameters and materials
The DKB352/PRO drills wet in concrete, reinforced concrete and masonry – sufficient for building penetrations, service pipes, ventilation and flue pipes, where hand-held tools are no longer adequate. The water cools the drill bit and binds the drilling dust into slurry; for drilling vertically upwards, a water collection ring is included.
- In a core drill stand: up to Ø 402 mm
- Wet drilling: concrete, reinforced concrete, masonry
- Operating mode: wet only, for use in the core drill stand only
Motor and gearbox
The 3300-watt motor, rated at 230 V and 16 A, operates via a three-speed gearbox in an oil bath. Large core bits run slowly in first gear with full torque; small ones run in third gear at high cutting speed. In reinforced concrete, the next lower gear is selected.
- Gear 1, 350 rpm: up to Ø 402 mm
- Gear 2, 700 rpm: up to Ø 202 mm
- Gear 3, 1100 rpm: up to Ø 102 mm
Additional functions
- Soft start: The drill bit starts without a torque surge, protecting the machine and the mains supply at start-up.
- LCD display and performance indicator: These show current consumption, power, motor temperature and operating hours, allowing the feed rate to be adjusted via the lever according to the actual load.
- Carbon brush warning system: Shuts down the machine in good time and indicates when the brushes need replacing on the display. A spare set is included.
Protective functions
- Slip clutch: Mechanically disconnects the power transmission as soon as the drill bit jams.
- Electronic protection: Protected against overload, overvoltage and overheating.
- Protection class II: Protective insulation; no earth conductor required.
- Personal protection circuit breaker: PRCD in the mains cable.
Core drill stand KBS352/PRO
The KBS352/PRO is a top-of-the-range stand: designed for diameters up to 402 mm and a drilling depth of 650 mm, yet still easy to manoeuvre at 18.5 kg with its castors. The unit is mounted on the feed carriage via the mounting adapter using four screws and a key. The feed mechanism has two gear shafts: the upper one is geared for slow, powerful feed during drilling, whilst the lower one moves the carriage quickly; the lever can be attached on either side. For angled drilling, the guide column can be tilted up to 45 degrees; levelling screws and spirit levels are used to align it. With the chassis fitted, the column is tilted backwards and pushed along on the wheels.
- Max. drilling diameter: Ø 402 mm
- Stroke: 650 mm
- Tilt: 0 to 45 degrees
- Mounting: Mounting adapter, height 60 mm
- Weight: 18.5 kg
- Chassis: attachable, two wheels with axle
Mounting to wall, floor and ceiling
The stand is positioned using the groove in the base plate via a threaded rod or the screw from a fixing set and secured with a nut; the fixing materials are not included in the set. When fixed to the ceiling, the mounting supports the stand and the device against gravity; the instructions highlight specific risks in this regard. Our fixing accessories depend on the surface:
- Kordel-Fix Set xl: Cord threaded rod with Kordel-Fix nut; quick to install and reusable. The first choice for repeated drilling in concrete.
- Concrete wall plugs and threaded rod: The classic anchoring method using metal wall plugs for load-bearing concrete; in brick walls, the instructions require a special masonry anchor.
- Setting tool: For cleanly setting the anchors without damaging the thread.
Our matching 1 1/4" UNC diamond core drill bits: wet diamond core bits for concrete and reinforced concrete.
Contents
The set comes complete with everything the tool and stand need for initial use, with the machine housed in a sturdy storage case.
DKB352/PRO core drill:
- Quick-release ring for diamond core drill bits
- Open-ended spanners (SW32 and SW41)
- Set of spare carbon brushes
- Earplugs and safety goggles
- Operating instructions
Core drill stand KBS352/PRO:
- Mounting adapter with installation accessories
- Feed lever
- Chassis, two wheels and axle with retaining bracket
- Double-ended open-ended spanners SW17 and SW19, Allen key SW6
- Operating instructions
Diamond core drill bits and fixing materials are not included.
Unit: 610 x 200 x 150 mm and 13.5 kg; stand: 1100 x 400 x 470 mm and 18.5 kg; case: 635 x 460 x 215 mm.
| Product type: | Diamond core drill with core drill stand |
|---|---|
| Suitable for: | Reinforced concrete | Masonry | Brick | Calcium silicate brick | Facing brick | Concrete |
| Power consumption: | 3,300 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | I |
| Number of gears: | 3 |
| Tool holder: | 1 1/4" UNC |
| Connection for core drilling rig: | Mounting adapter 60 mm |
| Mounting: | Kordel-Fix Kit xl |
| Water supply connection: | Gardena |
| Weight: | 13.5 kg |
| Weight (stand): | 18.5 kg |
| Vibration level: | 6 m/s² |
| Wet/dry drilling: | Wet |
| Additional functions: | LED/Load Indicator | Overload protection | Soft start |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drilling system |
| Mounting type: | Kordel-Fix Kit xl |
| Weight (drilling rig): | 13.5 kg |
Get in touch with us
Do you have any questions or would you like some professional advice? You can contact us in person, by telephone, by email or via WhatsApp.
Get in touch now