Item no.: 6216
KBS352/PRO
Core drill stand with dowel fixing for core drilling machines with a mounting adapter
Drilling diameter: max. 402 mm
Stroke: 650 mm
Mounting: dowels
Mounting: Mounting adapter
Available between 17.11. and 18.11.
| Product type: | Core drill stand |
|---|---|
| Weight: | 18.5 kg |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drill stand |
High customer satisfaction
Over 5,000 professionals trust us. We are Trusted Shops certified.
Top-class support
Expert and personalised advice from genuine experts.
Professional quality
Robust equipment for demanding tasks.
German brand
Sales, service and spare parts direct from Germany.
97% satisfaction: Over 5,000 tradespeople and construction companies trust us.
Top-class support: Expert and personalised advice from genuine specialists.
Professional quality: Robust tools for demanding jobs and continuous use.
German brand: Service and spare parts direct from Germany.
KBS352/PRO core drill stand: the dowel-mounted stand for holes up to 402 mm with a trolley
The KBS352/PRO is ideal for large through-holes, drilled into the stand using dowels: up to Ø 402 mm, 650 mm stroke, and weighing 18.5 kg, it can be rolled across the building site on its own chassis. It is a heavy-duty drill stand; the unit is mounted on the fixing adapter.
- Floor, wall and angled drilling up to 45 degrees: four levelling screws and two spirit levels ensure the large drill head is positioned at right angles.
- Two gear shafts: slow, powerful feed during drilling; rapid movement into position.
- Safety catch on the carriage: the carriage and drill do not drop when changing the core bit.
- Compatible with DKB352/PRO and DKB502/PRO: both up to Ø 402 mm, via the mounting adapter included in the scope of delivery.
Technical Specifications
| Product type: | Core drill stand |
|---|---|
| Weight: | 18.5 kg |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drill stand |
KBS352/PRO core drill stand for core drilling up to 402 mm
The KBS352/PRO is our heavy-duty core drilling stand: up to Ø 402 mm, 18.5 kg, 650 mm stroke, two gear shafts, guide column tiltable up to 45 degrees, mounting adapter, with attachable trolley.
For thick walls and foundations, the KBS352/XL-PRO is available with a long guide column for great drilling depths.
Drilling diameter and direction
With the KBS352/PRO, core drilling rigs can drill up to 402 mm in diameter – the range required for building penetrations, ventilation and chimney flues. The stroke of 650 mm is also the maximum drilling depth. The stand can be used on the floor or against a wall; for angled drilling, the guide stand can be tilted up to 45 degrees using the scale.
- Max. drilling diameter: Ø 402 mm
- Drilling direction: floor, wall
- Tilt: 0 to 45 degrees
- Stroke, max. drilling depth: 650 mm
Mounting and stability
The base plate is anchored to the substrate using a wall plug and a threaded rod, or with the Kordel-Fix set. In brick walls, the instructions specify the use of a special masonry anchor, as a concrete hammer-in anchor may crack the brick and become loose. Four levelling screws and two spirit levels align the stand so that the large drill head is positioned at a right angle and does not tilt. The fixing materials are not supplied with the stand; our fixing accessories depend on the substrate:
- Kordel-Fix Set xl: Kordel threaded rod with Kordel-Fix nut, quick to install and reusable. The first choice for repeated drilling in concrete.
- Concrete wall plugs and threaded rod: The classic anchoring method using metal wall plugs for load-bearing concrete.
- Setting tool: For clean insertion of the anchors without damaging the thread.
Feed, carriage and transport
The carriage has two gear shafts: on the upper shaft, the feed runs slowly and powerfully during drilling; on the lower shaft, the carriage moves quickly into position. A safety catch secures the carriage and the machine so that nothing drops when changing the drill bit. For transport, the chassis is bolted to the base plate; the stand is then tilted backwards and pushed on its wheels.
- Feed: lever, two toothed shafts for slow and fast feed
- Chassis: attachable, two wheels with axle and retaining bracket
- Weight: 18.5 kg
- Dimensions (H x W x D): 1100 x 400 x 470 mm
Compatible core drilling units
The supplied mounting adapter is screwed onto the machine using four M8 bolts and a key, and inserted into the carriage; a 60 mm clamping collar alone is not sufficient here. The following core drilling machines from our range are compatible:
- DKB352/PRO: 3,300-watt wet core drill, utilises the full drilling range up to Ø 402 mm. The first choice for this stand.
- DKB502/pro: 3,500-watt wet core drill, capable of drilling up to Ø 402 mm in this stand. The stand sets the limit here.
- SID352/PRO: Soft impact core drilling machine up to Ø 352 mm, for wet and dry drilling. For drilling with soft impact action, the manufacturer recommends our IDS352/V-PRO.
You can find further machines in our range of core drilling machines.
Contents of delivery
The KBS352/PRO comes ready for installation with everything required for machine connection, feed and transport:
- Mounting adapter with installation accessories (4 M8x35 cylindrical bolts, 10x8x100 key)
- Feed lever
- Chassis, two wheels and axle with retaining bracket
- Double-ended spanner, sizes SW17 and SW19
- Allen key SW6
- Operating instructions
Core drilling unit and fixing materials are not included.
Dimensions 1100 x 400 x 470 mm, weight 18.5 kg.
| Product type: | Core drill stand |
|---|---|
| Weight: | 18.5 kg |
| Max. drilling Ø: | up to 500 mm |
| Product type: | Core drill stand |
Get in touch with us
Do you have any questions or would you like some professional advice? You can contact us in person, by telephone, by email or via WhatsApp.
Get in touch now