Item no.: 6193
SID132/Xtrem
Soft impact core drilling machine for dry core drilling in concrete and masonry, for hand-held and stand-mounted use
Drilling diameter: concrete 132 mm / masonry 202 mm
Operation: Dry (soft hammer action)
Shank: M18
Material: Concrete, reinforced concrete, masonry
Available between 17.11. and 18.11.
| Product type: | Soft impact core drilling machine |
|---|---|
| Suitable for: | Reinforced concrete | Stone | Masonry | Concrete |
| Power consumption: | 1500 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | II |
| Number of gears: | 2 |
| Idling speed: | 1,500 rpm | 3,000 rpm |
| Gearbox lubrication: | Grease |
| Tool holder: | M18 external |
| Weight: | 3.7 kg |
| Vibration level: | 2.5 m/s² |
| Wet/dry drilling: | Dry |
| Drill guide: | Hand-held |
| Additional functions: | Backflow prevention | Brushless motor | Core ejection | LED/Load Indicator | Overload protection | Soft serve | Soft start |
| Max. drilling Ø: | 132 mm |
| Product type: | Core drilling rig |
High customer satisfaction
Over 5,000 professionals trust us. We are Trusted Shops certified.
Top-class support
Expert and personalised advice from genuine experts.
Professional quality
Robust equipment for demanding tasks.
German brand
Sales, service and spare parts direct from Germany.
97% satisfaction: Over 5,000 tradespeople and construction companies trust us.
Top-class support: Expert and personalised advice from genuine specialists.
Professional quality: Robust tools for demanding jobs and continuous use.
German brand: Service and spare parts direct from Germany.
SID132/Xtrem soft impact core drilling machine: 3.7 kg, dry drilling up to 132 mm in concrete
The SID132/Xtrem is ideal for recessing sockets and creating small openings without the need for water on site: 3.7 kg, brushless with 1,500 watts, soft-hammer action, dry drilling in concrete up to Ø 132 mm and in masonry up to Ø 202 mm. The lightest of our core drills, a purely hand-held tool.
- Two speeds with soft hammer action: 1,500 rpm up to Ø 132 mm, 3,000 rpm up to Ø 72 mm for back box cutters.
- Drilling depth gauge and core ejection: consistent depth for every socket cut; stuck cores are released via a switch.
- Kickback protection and slip clutch: the tool switches off if a jammed core bit causes it to jerk.
- Supplied in a case with an M16 adapter and a SDS-Plus pilot drill: the Dust extraction attachment is selected to match the drill bit.
Technical Specifications
| Product type: | Soft impact core drilling machine |
|---|---|
| Suitable for: | Reinforced concrete , Stone , Masonry , Concrete |
| Power consumption: | 1500 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | II |
| Number of gears: | 2 |
| Idling speed: | 1,500 rpm , 3,000 rpm |
| Gearbox lubrication: | Grease |
| Tool holder: | M18 external |
| Weight: | 3.7 kg |
| Vibration level: | 2.5 m/s² |
| Wet/dry drilling: | Dry |
| Drill guide: | Hand-held |
| Additional functions: | Backflow prevention , Brushless motor , Core ejection , LED/Load Indicator , Overload protection , Soft serve , Soft start |
| Max. drilling Ø: | 132 mm |
| Product type: | Core drilling rig |
SID132/Xtrem soft impact core drilling machine for dry drilling up to 132 mm in concrete and 202 mm in masonry
The SID132/Xtrem is the dedicated dry-drilling, hand-held model in our range of core drills: weighing 3.7 kg, with a 1500-watt brushless motor and switchable soft-hammer function, capable of drilling up to Ø 132 mm in concrete and up to Ø 202 mm in masonry.
Drilling diameters and materials
The SID132/Xtrem drills exclusively dry in concrete, reinforced concrete, stone, masonry, sand-lime brick and brick. In concrete and reinforced concrete, the switchable soft hammer action takes over the work normally performed by cooling water; in masonry, the machine drills without hammer action. The hammer action is switched on and off via a lever located directly on the machine. Drilling dust is channelled into an industrial vacuum cleaner via a screw-on Dust extraction attachment. The drilling range is suitable for flush-mounted sockets, cable and conduit pipes, heating and plumbing pipes, and small waste water pipes.
- Concrete, reinforced concrete: up to Ø 132 mm
- Masonry: up to Ø 202 mm, in first gear
- Dry drilling with soft hammer action: concrete, reinforced concrete
- Dry drilling with or without soft hammer action: stone, masonry, sand-lime brick, brick
Motor and gearbox
The brushless 230 V motor requires no carbon brushes and maintains stable performance under load. The grease-lubricated two-speed gearbox drives large core bits in first gear at full torque and small back box cutters in second gear at high cutting speed. The soft hammer function is activated via the drilling mode switch; this provides a gentle hammering action in addition to the rotational movement, which keeps the diamond segments sharp during dry drilling in concrete. The diameters specified for each gear apply to concrete of average hardness; for reinforced concrete, the lower gear should be selected.
- Power: 1500 W
- Speed 1, 1,500 rpm: up to Ø 132 mm, soft hammer action 24,000 blows/min
- Speed 2, 3,000 rpm: up to Ø 72 mm, soft hammer action 48,000 blows/min
Additional functions
- Core ejection: If a core becomes stuck in the core bit, press the switch three times quickly. The spindle makes a brief back-and-forth movement to loosen the core and stops automatically after 8 seconds.
- Soft start: Speed and power increase gradually when switched on; the core bit engages smoothly without a sudden torque surge causing the machine to jerk or the drill edge to break out.
- LED indicator: The red LED indicates overload, allowing the contact pressure to be reduced immediately; the yellow LED indicates overheating.
Safety features
- Kickback protection: Monitors the machine’s rotational movement around its longitudinal axis. If the drill bit jams and the tool jerks, the electronics immediately cut off the power supply.
- Slip clutch: Additionally disconnects the power transmission mechanically as soon as the drill bit becomes jammed in the material.
- Electronic protection: Protected against overload, overcurrent, overvoltage and overheating.
- Protection class: II
Hand-held drilling
The SID132/Xtrem is designed for hand-held operation; a core drill stand is not required. Weighing just 3.7 kg, this proves its worth when drilling overhead in ceilings and when carrying out a series of back box cutters. The spindle neck handle provided guides the second hand, whilst the drilling depth gauge ensures a consistent depth for socket recesses. The spindle has an M18 external thread; the supplied adapter converts this to M16 for back box cutters whilst also accommodating the SDS-Plus pilot drill, which guides the core bit during initial positioning. A jammed core bit can be loosened using the supplied open-ended spanner.
- Weight: 3.7 kg
- Tool holder: M18 external, with adapter for M16 external and SDS-Plus
- Power cable: 4 m
- Vibration level: 2.5 m/s²
Suitable core bits and Dust extraction attachments
A dust extraction attachment is not included; it is fitted between the spindle and the core bit and therefore also determines the mounting:
- M18 dust extraction attachment for M16: For back box cutters with an M16 thread, with a centring tip. The ideal choice for flush-mounted sockets.
- M16 back box cutter: Suitable for soft-hammer drilling, Ø 68 / 72 / 76 / 82 mm, for masonry, sand-lime brick and clay brick.
- Dust extraction attachment M18 to 1 1/4 UNC: For core bits with 1 1/4" UNC. The ideal choice for feed-throughs.
- Soft-hammer dry diamond core bits with 300 mm working length: For concrete and reinforced concrete with soft-hammer function engaged, via the Dust extraction attachment to 1 1/4" UNC.
- M18 to 1 1/4" UNC adapter: If you prefer to use the SAS-PRO dust extraction attachment with 1 1/4" UNC or wish to fit core bits without dust extraction, fit the adapter onto the spindle.
- M18 to M16 adapter: Accommodates M16 back box cutters whilst also featuring a Pilot drill in the centre for pilot drilling.
You can find further dry diamond core bits with 1 1/4" UNC in our range of diamond core drill bits.
Contents
The SID132/Xtrem comes in a storage case with everything you need to start recessing sockets:
- Spindle neck handle
- Adapter with M16 external thread and SDS-Plus shank
- SDS-Plus pilot drill, Ø 8 x 150 mm
- Drilling depth gauge
- Open-ended spanner SW24/SW22
- Operating instructions
Not included are core drill bits, Dust extraction attachment and a vacuum cleaner.
Dimensions 430 x 150 x 90 mm, weight 3.7 kg, case dimensions 530 x 370 x 150 mm.
| Product type: | Soft impact core drilling machine |
|---|---|
| Suitable for: | Reinforced concrete | Stone | Masonry | Concrete |
| Power consumption: | 1500 W |
| Voltage / Frequency: | 230 V / 50 Hz |
| Protection class: | II |
| Number of gears: | 2 |
| Idling speed: | 1,500 rpm | 3,000 rpm |
| Gearbox lubrication: | Grease |
| Tool holder: | M18 external |
| Weight: | 3.7 kg |
| Vibration level: | 2.5 m/s² |
| Wet/dry drilling: | Dry |
| Drill guide: | Hand-held |
| Additional functions: | Backflow prevention | Brushless motor | Core ejection | LED/Load Indicator | Overload protection | Soft serve | Soft start |
| Max. drilling Ø: | 132 mm |
| Product type: | Core drilling rig |
Get in touch with us
Do you have any questions or would you like some professional advice? You can contact us in person, by telephone, by email or via WhatsApp.
Get in touch now