Item no.: 6391
Kordel-Fix Set L with concrete thread, without plugs, 220 mm
Kordel-Fix Set: L-nut and 220 mm threaded rod / concrete thread
Available between 17.11. and 18.11.
| Product type: | Mounting bracket for core drill stand |
|---|---|
| Suitable for: | Reinforced concrete | Concrete |
| Thread: | Concrete thread |
| Length: | 220 mm |
| Product type: | Accessories |
High customer satisfaction
Over 5,000 professionals trust us. We are Trusted Shops certified.
Top-class support
Expert and personalised advice from genuine experts.
Professional quality
Robust equipment for demanding tasks.
German brand
Sales, service and spare parts direct from Germany.
97% satisfaction: Over 5,000 tradespeople and construction companies trust us.
Top-class support: Expert and personalised advice from genuine specialists.
Professional quality: Robust tools for demanding jobs and continuous use.
German brand: Service and spare parts direct from Germany.
Kordel-Fix Set L with 220 mm threaded rod with concrete thread
The Kordel-Fix Set L is a reusable stand mounting system featuring a swivel nut and a 55 mm flange. It is ideal for installation on concrete without dowels. Compatible with our KBS252/Light-K, IDS252/V-PRO and IDS352/V-PRO models.
- Included in the set: Kordel-Fix nut L, 220 mm threaded rod with concrete thread
Technical Specifications
| Product type: | Mounting bracket for core drill stand |
|---|---|
| Suitable for: | Reinforced concrete , Concrete |
| Thread: | Concrete thread |
| Length: | 220 mm |
| Product type: | Accessories |
Kordel-Fix Set L: Kordel-Fix nut L and 220 mm threaded rod with concrete thread, for core drill stands
The Kordel-Fix Set L with concrete thread is ideal for core drill operators who reposition their stand several times a day and wish to avoid using wall plugs: The rod, with its concrete thread, screws directly into a 15 mm drill hole; the Kordel-Fix Nut L is fitted by hand over the stand base and, thanks to its joint, tightens it flush even if the rod is positioned at an angle. Both components are reusable; the rod is only replaced once the concrete thread is worn out. Our Set L (210 mm, M12) uses concrete wall plugs, whilst the Set L (270 mm) is the longer version with a concrete thread.
How to fix the upright
At the drilling point, drill a hole using a 15 mm drill bit to a depth equal to the length of the concrete thread, then screw the rod in via the hexagon socket at the end using an impact driver, cordless screwdriver or SW 13 ratchet. The rod is designed for use in concrete; it is not intended for use in brick or other masonry, nor is it intended to be inserted a second time into the same drill hole. Next, place the stand base over the rod, aligning the elongated hole, then screw on the Kordel-Fix nut and tighten it using a SW 32 open-ended spanner. The 55 mm flange distributes the force over a wide area across the base, whilst the joint compensates for crooked poles and uneven base plates.
- Anchoring: Concrete thread directly into concrete or reinforced concrete, without dowels
- Drilled hole: Ø 15 mm, depth according to the length of the concrete thread
- Rod: Ø 17 mm, 220 mm long, hexagonal SW 13
- Nut: Flange Ø 55 mm, stainless steel, swivel joint, open-ended spanner SW 32
Size L or xl
The nut must fit the slotted hole in the stand base. Size L is for stands with a slotted hole up to 30 mm; for the base plates of the KBS-PRO series, our Kordel-Fix Set xl is available, featuring a 220 mm concrete thread with a 94 mm flange and the same rod.
Compatible with these core drill stands
According to the product description for the stands, size L is used with these models:
- KBS252/Light-K: The lightweight stand up to Ø 252 mm, whose base is fitted over the rod via the slotted hole.
- IDS252/V-PRO: Screw-fixed up to Ø 252 mm, 20 mm groove; alternatively secured by vacuum, in which case the set is not required.
The IDS352/V-PRO has a 25 mm groove and requires our Kordel-Fix Set xl.
The size corresponding to each stand is listed under ‘Mounting’ for each of our core drill stands.
Contents
The set contains both parts, which are also available separately:
- Kordel-Fix nut L, flange Ø 55 mm, stainless steel
- Cord threaded rod with concrete thread, 220 mm, Ø 17 mm
| Product type: | Mounting bracket for core drill stand |
|---|---|
| Suitable for: | Reinforced concrete | Concrete |
| Thread: | Concrete thread |
| Length: | 220 mm |
| Product type: | Accessories |
Get in touch with us
Do you have any questions or would you like some professional advice? You can contact us in person, by telephone, by email or via WhatsApp.
Get in touch now