Skip to main content Skip to search Skip to main navigation
Menu

Item no.: 6193

SID132/Xtrem

Soft impact core drilling machine for dry core drilling in concrete and masonry, for hand-held and stand-mounted use

Drilling diameter: concrete 132 mm / masonry 202 mm

Operation: Dry (soft hammer action)

Shank: M18

Material: Concrete, reinforced concrete, masonry

€487.30
Gross €579.89

Available between 17.11. and 18.11.

  • Germany
  • Austria
  • Switzerland
  • Belgium
  • Croatia
  • Cyprus
  • Czech Republic
  • Estonia
  • Finland
  • France
  • Greece
  • Hungary
  • Ireland
  • Italy
  • Latvia
  • Lithuania
  • Luxembourg
  • Netherlands
  • Poland
  • Portugal
  • Romania
  • Slovakia
  • Slovenia
  • Spain
  • Sweden
  • United Kingdom
Delivery time varies by delivery country
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Product number: 6193
Product type: Soft impact core drilling machine
Suitable for: Reinforced concrete | Stone | Masonry | Concrete
Power consumption: 1500 W
Voltage / Frequency: 230 V / 50 Hz
Protection class: II
Number of gears: 2
Idling speed: 1,500 rpm | 3,000 rpm
Gearbox lubrication: Grease
Tool holder: M18 external
Weight: 3.7 kg
Vibration level: 2.5 m/s²
Wet/dry drilling: Dry
Drill guide: Hand-held
Additional functions: Backflow prevention | Brushless motor | Core ejection | LED/Load Indicator | Overload protection | Soft serve | Soft start
Max. drilling Ø: 132 mm
Product type: Core drilling rig
Product number: 6193

High customer satisfaction

Over 5,000 professionals trust us. We are Trusted Shops certified.

Top-class support

Expert and personalised advice from genuine experts.

Professional quality

Robust equipment for demanding tasks.

German brand

Sales, service and spare parts direct from Germany.

97% satisfaction: Over 5,000 tradespeople and construction companies trust us.

Top-class support: Expert and personalised advice from genuine specialists.

Professional quality: Robust tools for demanding jobs and continuous use.

German brand: Service and spare parts direct from Germany.

SID132/Xtrem soft impact core drilling machine: 3.7 kg, dry drilling up to 132 mm in concrete

The SID132/Xtrem is ideal for recessing sockets and creating small openings without the need for water on site: 3.7 kg, brushless with 1,500 watts, soft-hammer action, dry drilling in concrete up to Ø 132 mm and in masonry up to Ø 202 mm. The lightest of our core drills, a purely hand-held tool.

  • Two speeds with soft hammer action: 1,500 rpm up to Ø 132 mm, 3,000 rpm up to Ø 72 mm for back box cutters.
  • Drilling depth gauge and core ejection: consistent depth for every socket cut; stuck cores are released via a switch.
  • Kickback protection and slip clutch: the tool switches off if a jammed core bit causes it to jerk.
  • Supplied in a case with an M16 adapter and a SDS-Plus pilot drill: the Dust extraction attachment is selected to match the drill bit.

Technical Specifications

Product type: Soft impact core drilling machine
Suitable for: Reinforced concrete , Stone , Masonry , Concrete
Power consumption: 1500 W
Voltage / Frequency: 230 V / 50 Hz
Protection class: II
Number of gears: 2
Idling speed: 1,500 rpm , 3,000 rpm
Gearbox lubrication: Grease
Tool holder: M18 external
Weight: 3.7 kg
Vibration level: 2.5 m/s²
Wet/dry drilling: Dry
Drill guide: Hand-held
Additional functions: Backflow prevention , Brushless motor , Core ejection , LED/Load Indicator , Overload protection , Soft serve , Soft start
Max. drilling Ø: 132 mm
Product type: Core drilling rig
Description

SID132/Xtrem soft impact core drilling machine for dry drilling up to 132 mm in concrete and 202 mm in masonry

The SID132/Xtrem is the dedicated dry-drilling, hand-held model in our range of core drills: weighing 3.7 kg, with a 1500-watt brushless motor and switchable soft-hammer function, capable of drilling up to Ø 132 mm in concrete and up to Ø 202 mm in masonry.

Drilling diameters and materials

The SID132/Xtrem drills exclusively dry in concrete, reinforced concrete, stone, masonry, sand-lime brick and brick. In concrete and reinforced concrete, the switchable soft hammer action takes over the work normally performed by cooling water; in masonry, the machine drills without hammer action. The hammer action is switched on and off via a lever located directly on the machine. Drilling dust is channelled into an industrial vacuum cleaner via a screw-on Dust extraction attachment. The drilling range is suitable for flush-mounted sockets, cable and conduit pipes, heating and plumbing pipes, and small waste water pipes.

  • Concrete, reinforced concrete: up to Ø 132 mm
  • Masonry: up to Ø 202 mm, in first gear
  • Dry drilling with soft hammer action: concrete, reinforced concrete
  • Dry drilling with or without soft hammer action: stone, masonry, sand-lime brick, brick

Motor and gearbox

The brushless 230 V motor requires no carbon brushes and maintains stable performance under load. The grease-lubricated two-speed gearbox drives large core bits in first gear at full torque and small back box cutters in second gear at high cutting speed. The soft hammer function is activated via the drilling mode switch; this provides a gentle hammering action in addition to the rotational movement, which keeps the diamond segments sharp during dry drilling in concrete. The diameters specified for each gear apply to concrete of average hardness; for reinforced concrete, the lower gear should be selected.

  • Power: 1500 W
  • Speed 1, 1,500 rpm: up to Ø 132 mm, soft hammer action 24,000 blows/min
  • Speed 2, 3,000 rpm: up to Ø 72 mm, soft hammer action 48,000 blows/min

Additional functions

  • Core ejection: If a core becomes stuck in the core bit, press the switch three times quickly. The spindle makes a brief back-and-forth movement to loosen the core and stops automatically after 8 seconds.
  • Soft start: Speed and power increase gradually when switched on; the core bit engages smoothly without a sudden torque surge causing the machine to jerk or the drill edge to break out.
  • LED indicator: The red LED indicates overload, allowing the contact pressure to be reduced immediately; the yellow LED indicates overheating.

Safety features

  • Kickback protection: Monitors the machine’s rotational movement around its longitudinal axis. If the drill bit jams and the tool jerks, the electronics immediately cut off the power supply.
  • Slip clutch: Additionally disconnects the power transmission mechanically as soon as the drill bit becomes jammed in the material.
  • Electronic protection: Protected against overload, overcurrent, overvoltage and overheating.
  • Protection class: II

Hand-held drilling

The SID132/Xtrem is designed for hand-held operation; a core drill stand is not required. Weighing just 3.7 kg, this proves its worth when drilling overhead in ceilings and when carrying out a series of back box cutters. The spindle neck handle provided guides the second hand, whilst the drilling depth gauge ensures a consistent depth for socket recesses. The spindle has an M18 external thread; the supplied adapter converts this to M16 for back box cutters whilst also accommodating the SDS-Plus pilot drill, which guides the core bit during initial positioning. A jammed core bit can be loosened using the supplied open-ended spanner.

  • Weight: 3.7 kg
  • Tool holder: M18 external, with adapter for M16 external and SDS-Plus
  • Power cable: 4 m
  • Vibration level: 2.5 m/s²

Suitable core bits and Dust extraction attachments

A dust extraction attachment is not included; it is fitted between the spindle and the core bit and therefore also determines the mounting:

You can find further dry diamond core bits with 1 1/4" UNC in our range of diamond core drill bits.

Contents

The SID132/Xtrem comes in a storage case with everything you need to start recessing sockets:

  • Spindle neck handle
  • Adapter with M16 external thread and SDS-Plus shank
  • SDS-Plus pilot drill, Ø 8 x 150 mm
  • Drilling depth gauge
  • Open-ended spanner SW24/SW22
  • Operating instructions

Not included are core drill bits, Dust extraction attachment and a vacuum cleaner.

Dimensions 430 x 150 x 90 mm, weight 3.7 kg, case dimensions 530 x 370 x 150 mm.

Properties
Product type: Soft impact core drilling machine
Suitable for: Reinforced concrete | Stone | Masonry | Concrete
Power consumption: 1500 W
Voltage / Frequency: 230 V / 50 Hz
Protection class: II
Number of gears: 2
Idling speed: 1,500 rpm | 3,000 rpm
Gearbox lubrication: Grease
Tool holder: M18 external
Weight: 3.7 kg
Vibration level: 2.5 m/s²
Wet/dry drilling: Dry
Drill guide: Hand-held
Additional functions: Backflow prevention | Brushless motor | Core ejection | LED/Load Indicator | Overload protection | Soft serve | Soft start
Max. drilling Ø: 132 mm
Product type: Core drilling rig
Documents 2
Advice

Get in touch with us

Do you have any questions or would you like some professional advice? You can contact us in person, by telephone, by email or via WhatsApp.

Get in touch now
info@kernlochbohrer.com A reply within 24 hours
+49 7022 5034900 Mon–Fri: 8 am–6 pm
WhatsApp chat 7 days a week


Skip product gallery

Customers also bought

Soft-hammer dry diamond core bit, Ø 32 to 202 mm, 1 1/4" UNC
Product number: 5052
Soft-hammer dry diamond core bit, Ø 32 to 202 mm, 1 1/4" UNC

Regular price:

€61.69

G 1/2" centre point for Diamond core drill bits
Product number: 5002
G 1/2" centre point for Diamond core drill bits

Regular price:

€82.40

Sharpening plate for diamond tools
Product number: 2001
Sharpening plate for diamond tools

Regular price:

€99.90

Soft-hammer dry diamond core bit, Ø 32 to 202 mm, 1 1/4" UNC
Product number: 5077
Soft-hammer dry diamond core bit, Ø 32 to 202 mm, 1 1/4" UNC

Regular price:

€90.76

M18 to M16 dust extraction attachment for back box cutters
Product number: 6315
M18 to M16 dust extraction attachment for back box cutters

Regular price:

€41.99